Delta Breez GreenBuilder Fan 80 CFM/Light/Motion/Humidity Sensor - GBR80MHL

$ 318.00

$ 172.00

Delta Breez GreenBuilder GBR80MHL is a low noise ceiling mount ventilating Fan/Light combo with Motion and Humidity Dual Sensor rated for continuous running. This fan is ENERGY STAR® qualifi ed, HVI, UL, and cUL certi fied, and can be used to comply with ASHRAE 62.2 (local and whole building continuous and intermittent operation), CA Title 24, and CALGreen requirements.

Motor/Blower

  • Power rating of 120 volts/60Hz
  • DC brushless motor engineered to run continuously
  • Motor equipped with thermal cutoff fuse.
  • Removable with permanently lubricated plug-in motor

Housing

  • Galvanized steel body
  • Detachable 4" diameter duct adapter
  • Built-in backdraft damper
  • Easy installation

Grille

  • Attractive design using ABS material
  • Attached to housing with included grille bracket

Light

  • (1) GU24 26-Watt CFL lamp included
  • Main light output 1850 Lumens, 2700K

LED Indicator

  • Blue and amber LED indicator lights to show humidity sensor and full speed modes

Warranty

  • 3-year limited warranty

Features

  • Adjustable humidity set points between ~50% to ~80% RH
  • Adjustable low speed airflow
  • For ceiling mount only, air flow of 80 CFM(±10%) and 0.8 Sones at 0.1" static pressure
  • Power consumption approximately 11.5 Watts with an effi ciency rating approximately 6.9 CFM/Watt at 0.1" static pressure
  • UL and cUL listed for tub/shower enclosure when used with GFCI-protected branch circuit wiring

DC Motor Technology

  • Allows fan to operate in humidity control mode or motion mode by humidity and motion sensors
  • For humidity control mode, when humidity is above the user-adjustable set-point, fan runs at full speed (80 CFM). When humidity is below the set-point, the fan runs continuously at a pre-set lower level (0 or 50 CFM)
  • When motion is detected, fan runs at full speed (80 CFM). When user leaves, fan remains running 10 minutes delay time at full speed mode
  • Built-in soft start function to increase bearings' life
  • Automatically powers OFF when impeller is locked